SuperSat

[Tom Thumb]

Jeff,
What size nozzles do you use and where can they be purchased?

Thanks

[Waxman]

My IBA uses HP pass after foam polish then hp wax then spot free.

Not sure if another HP pass would help that much, but it may.

I thought Blendco would clean better than your pictures! Geez.

[Jeff_L]

Originally Posted by Tom Thumb

Jeff,
What size nozzles do you use and where can they be purchased?

Thanks

Windtrax has them. Page 236 of their Spring 2009 catalog. I use a mixture of 1504 and 2505 I believe. I have a Hydrowash, so all my tips are on spinners so the car is blasted with wide angle and narrow angle tips repeatedly.

[car washing systems inc]

Have you titrated? If so what did it come out at? This looks like road film, have you called your distributor?

[rph9168]

It could be road film but if the titrations are right probably not. My guess would be the sealant is either bad, applying too much or perhaps interacting with another chemical causing it to haze. The reason I asked before about the windows is that glass has a neutral charge. If there is no film on the windows that would eliminate some sealants from being the problem.

[cfcw]

I would wash this car again thoroughly in the SS bay and see when this film develops. Pay attention to if the film only develops after a rain or if it develops after continuous washing in dry weather.

[Reds]

I have a WW2.0. I do 2 passes hiph prsoak, hp rinse, triple foam, then hp rinse, then low pressure wax, then spot free. I have a lot of vehicles with road film and rarely see one come out with a film on it. Usually see a film if a car has not been washed regularly. Maybe hp rinse after triple foam would help in case foam and sealant mixing are causing the problem?